新型冠狀病毒抗原檢測試劑盒 [免疫層析法] [LS-C-T-009]

$30
filler

價格:
$150 $180

Description

產品介紹:


https://www.youtube.com/watch?v=N_kaMYEroSM

  • 1.Twist off the top of the buffer bottle, slowly dispense all of the buffer into the extraction Tube.
  • 2. Remove the cotton swab from the container, being careful not to touch the end that should go into the nose.
  • 3. Insert the absorbent tip of the cotton swab into the nostril. Do not insert more than 3-4 cm into the nose.
  • 4. Slowly swirl the swab at least 4 times inside the nostril for about 15 seconds. Make sure collect nasal substances present
  • on the swab.
  • 6. Using the same cotton swab, repeat steps 3~ 5 in the other nostril.
  • 7. Insert the swab into the sample extraction solution, swirl it about 10 times, and let it sit at room temperature for 5 min.
  • 8. Shake the swab to keep as much liquid as possible in the tube, then remove the disposable swab.
  • 9. Install the drip plug.
  • 10. Tear off the foil packing bag, take out the test box, lay it flat on a horizontal table, lay down vertically 3-4 drops of sample
  • (approximately 100 μL) into the hole and start timing.
  • 11. Read the result within 15~20 minutes of adding the sample. The test result is invalid after 20 minutes.
  • 12. Place all kit components in the bag provided and seal it to prevent contamination.
  • 13. The sample bag can be disposed of with normal household waste in compliance with the applicable local regulations.
  • 14. Please disinfect your hands with a disinfectant again.
  • 【Interpretation Of The Result】
  • To read the test results, all you have to do is look at the results window.
  • 1.Test positive
  • If you see two lines in the results window (line C and line T), the test result is positive.
  • In case of a positive test result:
  • - There is currently a suspicion of COVID-19 infection.
  • - Contact physician/family physician or local health department immediately.
  • - Follow local guidelines for self-isolation.
  • - Have a PCR confirmatory test performed.
  • 2.Test negative
  • If you only see the C line but not the T line, the test result is negative.
  • If the test result is negative:
  • - Continue to follow all applicable rules regarding contact with others and protective measures.
  • - even if the test is negative, infection may still be present.
  • - In case of suspicion, repeat the test after 1 - 2 days, as the coronavirus cannot be detected accurately in all phases of an
  • infection.
  • 3.Invalid test
  • If there is no C line or if there is only T line, the result is not valid.
  • In case of an invalid test result:
  • - Possibly Caused by incorrect test performance.
  • - Repeat the test.
  • - If test results remain invalid, contact a physician or COVID-19 testing center.

  • 【Introduction】
  • The kit is a rapid immunochromatographic test for use at home to detect the presence of 2019-nCoV antigens in anterior nasal swab specimen. It is intended as an aid in the diagnosis of coronavirus disease (COVID-19).
  • Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2, or 2019-nCoV) is an enveloped non-segmented positive-sense RNA virus. It is the cause of coronavirus disease (COVID-19), which is contagious in humans. 2019-nCoV has several structural  proteins including spike (S), envelope (E), membrane (M), and nucleocapsid (N).
  • The kit uses an immunocapture method, it is designed to detect the presence or absence of 2019-nCoV nucleocapsid proteins in anterior nasal swab samples from patients with signs and symptoms of infection who are suspected of COVID-19.When specimens are processed and added to the test cartridge,2019-nCoV antigens present in the specimen bind to antibodies conjugated to colloidal gold in the test strip. The antigen-conjugate complexes migrate across the test strip to the reaction area and are captured by a line of antibodies bound on the membrane. A color band will show up when antigen-conjugate is deposited at the Test “T” position and the Control “C” position on the device.
  • 【Test Contents】
  • Required and not provided:
  • 1 timer
  • 1 hand sanitizer
  • 【Test Prepation】
  • Open the kit. If the temperature of the kit and the sample extraction solution is very low, bring them to temperature(10 °C
  • to 30 °C) for 15 ~ 30 minutes, then perform the test. Use within one hour of opening the foil pouch. Wash your hands with
  • a disinfectant. The entire surface of the hands should be washed and dried. Find a quiet place to do the test, preferably sitting
  • at a table.


安全支付

American Express Apple Pay Google Pay Mastercard Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

產品推介

最近瀏覽過的